Fujitsu ETERNUS DX100 S3 Operation Manual page 81

Chapter 5 Expansion Functions
5.2 Installing Additional Drive Enclosures
(2)
Attach the rack rails to the rack.
(i)
(ii)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
Insert the rack rails into the holes of the front and the rear rack pillars to lock the rail lock
lever.
[Left]
[Right]
(Rack pillar: front)
Use the M4 screws to fasten the front and the rear rack rails.
Use the washers to fasten the rack rails to the front and rear rack pillars.
Make sure to attach the rack rails to rack pillars so that they fit exactly together without
any space between them.
Rack rail
(left)
Washer
M4 screw
Washer
M4 screw
(Rack pillar: front)
The M4 screw positions for the rack rails are determined by the high-density drive enclo-
sure base line.
81
Copyright 2014 FUJITSU LIMITED
Rail lock lever
Washer
M4 screw
(Rack pillar: rear)
Rack rail
(right)
(Rack pillar: rear)
Washer
M4 screw
P3AM-7662-04ENZ0