Chapter 5
Expansion Functions
5.2
Installing Additional Drive Enclosures
(5)
Fasten the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack pillar.
(6)
Attach the "DE_No." labels to the positions shown below.
Attach the labels in the same installation order as the drive enclosures (cable between enclo-
sures connection order).
Right front side of the drive enclosure
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Operation Guide (Basic)
M5 screws
DE_No. label
The DE_No. labels are supplied with the ETERNUS DX.
Copyright 2014 FUJITSU LIMITED
M5 screws
Upper right rear side of the drive enclosure
79
P3AM-7662-04ENZ0