Figure 9 Host Interface For Copper Twinax Cable Connection (Installed In A Controller); Figure 10 Iscsi 10Gbit/S (10Gbase-T) Interface (Installed In A Controller) - Fujitsu ETERNUS AF250 S2 Basic Operation Manual
Hide thumbs
Also See for ETERNUS AF250 S2:
- Configuration manual (171 pages) ,
- Site planning manual (38 pages) ,
- Design manual (171 pages)
Table of Contents
Advertisement
1.
Component Names and LED Names
Controller Enclosures
●
iSCSI 10Gbit/s (10GBASE-SR) (for Copper Twinax Cable Connection)
The ports on the host interface are used for connecting a controller to a server with a Copper Twinax cable.
Figure 9 Host Interface for Copper Twinax Cable Connection (Installed in a Controller)
2
1
1.
Host interface (CA#0)
2.
Host interface port (CA#0, Port#0)
3.
Host interface port (CA#0, Port#1)
4.
Host interface (CA#1)
5.
Host interface port (CA#1, Port#0)
6.
Host interface port (CA#1, Port#1)
●
iSCSI 10Gbit/s (10GBASE-T)
The ports on the host interface are used to connect LAN cables. This port uses an RJ-45 connector.
Figure 10 iSCSI 10Gbit/s (10GBASE-T) Interface (Installed in a Controller)
2
1
1.
Host interface (CA#0)
2.
Host interface port (CA#0, Port#0)
3.
Host interface port (CA#0, Port#1)
4.
Host interface (CA#1)
5.
Host interface port (CA#1, Port#0)
6.
Host interface port (CA#1, Port#1)
3
3
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Operation Guide (Basic)
Copyright 2019 FUJITSU LIMITED
6
5
4
6
5
4
15
P3AG-1842-06ENZ0
Advertisement
Table of Contents
