Chapter 1
Component Names and LED Names
1.1
Controller Enclosures
●
FC (for the ETERNUS DX100 S4)
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port
uses a Dual LC connector.
Figure 1.11 FC Interface (Installed in a Controller)
4
1.
Host interface (CA#0)
2.
Host interface port (CA#0, Port#0)
3.
Host interface port (CA#0, Port#1)
4.
Host interface (CA#1)
5.
Host interface port (CA#1, Port#0)
6.
Host interface port (CA#1, Port#1)
●
FC (for the ETERNUS DX100 S4 single controller model and the ETERNUS DX200 S4)
The ports on the host interface are used for connecting a controller to a server with an FC cable. This port
uses a Dual LC connector.
Figure 1.12 Host Interface for FC Cable Connection (Installed in a Controller)
1
1.
Host interface (CA#0)
2.
Host interface port (CA#0, Port#0)
3.
Host interface port (CA#0, Port#1)
4.
Host interface (CA#1)
5.
Host interface port (CA#1, Port#0)
6.
Host interface port (CA#1, Port#1)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
5
6
2
3
Copyright 2017 FUJITSU LIMITED
1
2
3
5
6
4
23
P3AM-7662-09ENZ0