Removing The Topcoat Cartridge - DataCard ImageCard IV User Manual

4-14
•
i
If you change the type of supply material you use, see

Removing the topcoat cartridge

Remove the topcoat cartridge when a "Topcoat empty" message appears or when
setting up the printer.
Remove the topcoat cartridge
1
2
3
Replace the topcoat cartridge
settings" on page 6-15 for the complete process to follow.
Push down on the corner of the printer's top cover to unlatch it. Lift the top cover
to the fully upright position.
When the top cover opens, the interlock switch removes power to the motors
!
and fans. Power is removed from the heater in the topcoat (and overlay)
station. The topcoat (and overlay) station remains HOT.
Move the supply tracker away from the supply roll until it stops (step 1 in
Figure 4-11).
i
If the supply tracker does not have a handle, it will move out of the way
automatically.
Pull up on the cartridge lock to release the topcoat cartridge (step 2 in
Figure 4-11).
i
On some cartridges, push and release the cartridge lock to release the
topcoat cartridge.
1
Figure 4-11: Remove the topcoat cartridge
"Changing operational
2
3
iciv145u
User's Guide for the ImageCard® IV Printer
Loading supplies