DataCard ImageCard IV User Manual page 147

Troubleshooting
7
8
9
10 Place the plastic bag around the printer and close it.
11 Place the printer on the bottom shipping cushion.
12 Place the top shipping cushion on the printer (step 1 in
i
13 Replace any other shipping materials that are available.
14 Place the accessories bag on top of the shipping cushion (step 2 in
i
15 Slide the printer and shipping cushions into the shipping carton (step 3 in
User's Guide for the ImageCard® IV Printer
Close the cover and press down to latch it.
Use the original shipping carton, plastic bag, and foam shipping cushions.
Latch the card trays to the printer so they do not move during shipment. You can
also use clear packing tape to further secure the trays and their covers.
Service might ask you to ship cards or additional samples of your current
supplies. If service requests cards or supply samples, place them in an envelope,
plastic bag, or in the accessory bag to prevent damage to the printer.
If you are transporting the printer to another location for use, be sure to pack this
User's Guide, the interface cable, the power cord, any smart card serial cables,
printer driver CD-ROM, the cleaning pen and cleaning stick, the warranty, the
declaration of conformity, and the optional key in the accessories bag.
5
6
Figure 8-8: Pack the printer for shipping
Figure 8-8).
Figure
4
1
2
3
8-25
8-8).
Figure 8-8).