Starting Or Quitting Advanced Setup; Color Settings - DataCard ImageCard IV User Manual

6-14
Minimizing the Printer Toolbox
The Minimize button closes the Printer Toolbox dialog box. The program continues to
run.

Starting or quitting Advanced Setup

The Advanced Setup button on the Printer Toolbox changes the printer driver from
printing mode to Advanced Setup mode. After you start Advanced Setup, additional
tabs appear on the Printer Toolbox where you can change printing intensity, position of
printing, and laminator settings.
E
For information about using the features available in Advanced Setup, see the
e-Guide for ImageCard IV Printers .
While in Advanced Setup, the button on the Status page is named "Quit Advanced
Setup." Click the Quit Advanced Setup button to remove the additional tabs and return
to printing mode.
E

Color settings

The Color Settings tab is available from the Printer Toolbox at any time. For directly
networked and shared PCs, color settings affect cards sent from the PC.
You cannot start Advanced Setup while printing a card. Wait until all cards are
printed, and then click Advanced Setup.
For directly networked PCs, Datacard recommends that you use Advanced Setup
only from an Administrative PC, and that you suspend communication at other
PCs connected to the printer.
Figure 6-9: Color Settings page and preview
Using the printer driver
User's Guide for the ImageCard® IV Printer