Powering On The Printer And Pc - DataCard ImageCard IV User Manual

5-4
Status Light
Red Amber Green
Steady green
Blinking green
Steady amber
Blinking amber
Steady red
Off

Powering on the printer and PC

Use the following procedure to power on the printer and attached PC. You might
change this procedure based on your policy.
Power on the printer and PC
i
1
2
Description
The printer is starting.
The printer is ready and waiting for cards.
The printer is busy printing cards.
The printer is paused without an error.
The printer has issued a message. See the PC for the
message.
The printer has a problem that requires service.
The printer top cover is open, such as when replacing
supplies or fixing a problem.
If cards were processing when the cover was opened,
see
situation.
If the printer is connected over a network using a print server, make sure the
driver is installed and configured on the PC before using it.
Load cards in the input tray. Make sure all supplies are loaded. See
supplies" on page 4-1 for more information.
Remove any printed or rejected cards from the output tray. See
on page 5-15.
"Interrupted printing" on page 5-11
User's Guide for the ImageCard® IV Printer
Using the printer
to correct the
"Loading
"Removing cards"