Environmental Requirements; Unpacking The Printer - DataCard ImageCard IV User Manual

2-4

Environmental requirements

The ImageCard IV printer requires the following environmental conditions for optimal
operation:
•
•
If you store the ImageCard IV printer, provide an environment with the following
conditions:
•
•

Unpacking the printer

After you select a location that meets the site requirements for the ImageCard IV
printer, unpack the printer.
You need a cutting device to unpack the printer.
i
Make sure you have two or more people to assist with unpacking the printer. Two
people can lift the printer while one or more people assist with removing packaging.
Unpack the printer
1
2
3
Operating relative humidity: 20% to 80% non-condensing
Operating temperature range: 55° F to 80° F (13° C to 27° C)
Storage relative humidity: 20% to 80% non-condensing
Storage temperature range: 0° F to 100° F (-17.8° C to 37.8° C)
Place the shipping carton on the floor or other firm level surface.
Open the end marked "Open This End" by cutting the tape on the shipping carton.
Open the inside flap of the shipping carton.
Figure 1-2: Remove the printer from the shipping carton
2
4
3
1
User's Guide for the ImageCard® IV Printer
Getting started