Responding To Messages - DataCard ImageCard IV User Manual

5-14
4
5
Remove rejected cards
Remove rejected cards from the reject bin when the "Reject bin full" message appears
or when removing completed cards. Cards are rejected by the optional particle
detector and when a problem occurs while personalizing a card.
1
2
3
4

Responding to messages

The printer provides information to the printer driver about the status of cards being
processed. If the printer is not able to process and print a card, the printer driver
generates a message on the PC in response to this situation. In most cases, the
message is displayed on the PC. Some applications manage printer driver messages,
and those messages might be different than described in this section.
In some circumstances, the printer might beep and the status light blink amber without
a message appearing on the PC. The most likely causes are:
•
Hold the card output tray and release the output tray card pusher.
Replace the output tray cover. If the printer has a lock, lock the printer.
If the printer has a lock, unlock the printer. Lift the output tray cover and set aside
(step 1 in Figure 5-8).
Lift the cards from the reject bin (step 2 in
Figure 5-8: Remove rejected cards
Dispose of partly processed cards according to your policies for handling the
confidential data that might be on the cards.
Replace the output tray cover. If the printer has a lock, lock the printer.
Renaming the printer (Restart Windows to fix the problem)
♦
Figure 5-8).
1
2
ICIV004U
♦
User's Guide for the ImageCard® IV Printer
Using the printer