xStack® DGS-3120 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
State
Click the Apply button to accept the changes made.
CFM MIPCCM Table
To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below:
CFM Loopback Settings
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
Figure 10–10 CFM Port Settings Window
Description
Specifies the unit's ID used.
Here the user can select the port range used for this configuration.
Here the user can enable or disable the state of specific port regarding the CFM
configuration.
Figure 10–11 CFM MIPCCM Table Window
272