Connecting The Printer To Your Network; Connecting The Printer Through The Usb Interface; Connecting The Printer Through The Serial Port; Connecting The Printer Through The Parallel Port - Intermec PF8d User Manual

Connecting the Printer to Your Network

Connecting the Printer Through the USB Interface

Connecting the Printer Through the Serial Port

Connecting the Printer Through the Parallel Port

Turning On the Printer

PF8d/PF8t Printer User's Guide
11 On the Hardware Installation warning screen, click Continue
Anyway.
12 Click Finish to exit the New Hardware Wizard. InterDriver files
are now installed on your computer.
All PF8 models are fitted with a 36-pin connector for the parallel
interface port, a 9-pin connector for the RS-232 serial interface port,
and a USB connector.
To enable the USB connection, install the Intermec InterDriver
software on your computer. The USB interface is not suitable for
terminal connections or programming. See
Driver" on page 8.
You can use the serial connection with either LabelShop or Intermec
InterDriver. You can also use it to send commands directly through
the terminal connection.
You can use the parallel connection with LabelShop or Intermec
InterDriver. The parallel port supports Windows plug-and-play and
additional status reporting.
There is a danger of personal injury if the printer and power
supply are operated in an environment where they can get wet.
Use only Intermec power supply adapter P/N 1-092363-xx.
1 Place the printer on a stable surface.
Chapter 2 — Installing the Printer
"Installing the Printer
9