Installing The Sas-Sata Hard Drive Cage - HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual

64 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
11. Remove the hard drive cage.

Installing the SAS-SATA hard drive cage

1. Install the SAS controller into an empty PCI-X slot.
2. Connect the two SAS-SATA cables to the SAS controller.
3. Slide the drive cage part of the way into the bay.
4. Connect the power cable connectors as follows:
−
Connect the 10-pin connector to the SAS-SATA drive cage backplane.