System Maintenance Switch - HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual

Item
1
2
3
4
5
6
7
8
9
10
11
12
* x8 PCI Express cards are supported, but will run at x4 speeds.
** The server comes with iLO remote management capability embedded on the system
board. The 30-pin remote management connector for the RILOE II board is provided if the
server environment requires an upgrade for improved Remote Console performance.

System maintenance switch

The system maintenance switch (SW1) is a six-position switch that is used for
system configuration. The default position for all six positions is Off.
Description
Redundant fan 2 connector
System maintenance switch
System battery
Redundant fan 4 connector
64-bit/100-MHz PCI-X slot,
bus 3
64-bit/100-MHz PCI-X slot,
bus 3
64-bit/100-MHz PCI-X slot,
bus 7
64-bit/100-MHz PCI-X slot,
bus 7
PCI Express x4 slot, bus
11 *
PCI Express x4 slot, bus
14 *
RILOE II connector (install
adapter into slot 1) **
Power supply signal
connector
Server component identification
Item Description
13 Power supply connector
14 SCSI port 1
15 PPM socket 2
16 PPM socket 1 (populated)
17 SCSI port 2
18 Fan cable connector
19 Diskette drive connector
20 IDE connector
21 DIMM slots
22 Processor 1
23 Processor 2
15