22
HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
SCSI configurations
Configuration
Simplex
Duplex
Hot-plug SCSI hard drive LEDs
Item
1
NOTE: These SCSI ID designations apply regardless of the controller
or the configuration used.
NOTE: The standard cabling configuration for the server is simplex.
Duplex is an option requiring the duplex kit. Refer to "Server Cabling
(on page 99)" for cabling information.
Channel 1
SCSI IDs 0, 1, 2, 3,
4, 5
SCSI IDs 0, 1, 2, 3
IMPORTANT: After changing any SCSI configuration, be sure the
proper boot controller order is set in RBSU.
LED Description
Activity status
Channel 2
Unused
SCSI IDs 4, 5
Status
On = Drive activity
Flashing = High activity on the drive or drive
is being configured as part of an array.
Off = No drive activity