HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual page 148

148 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
Server Fault Indications Flowchart
Symptoms:
•
Server boots, but a fault event is reported by Insight Management Agents (on
page 122)
•
Server boots, but the internal health LED or external health LED is red or
amber
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item
1
2
3
4
5
6
7
NOTE: For the location of server LEDs and information on their
statuses, refer to the server documentation.
Refer to
"Management Agents (on page 122)"
• "Integrated Management Log"
• "Event List Error Messages (on page 278)"
Server user guide or setup and installation guide, located on
the Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)
System Management Homepage at https://localhost:2381
(https://localhost:2381)
"Power-On Problems ("Power-on problems flowchart" on page
141)"
• "Hard Drive Problems (on page 165)"
• Server maintenance and service guide, located on the
Documentation CD or the HP website
(http://www.hp.com/products/servers/platforms)
"HP Insight Diagnostics (on page 126)"