203-Memory Address Error; 207-Memory Configuration Warning - Dimm In Socket X Does Not Have Primary Width Of 4 And Only Supports Standard Ecc; 207-Invalid Memory Configuration - Dimms Must Be Installed Sequentially; 207-Invalid Memory Configuration - Dimm Size Parameters Not Supported - HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual

Troubleshooting 241

203-Memory Address Error

Audible Beeps: None
Possible Cause: Memory failure detected.
Action: Run Insight Diagnostics ("HP Insight Diagnostics" on page 126 ) and
replace failed components as indicated.
207-Memory Configuration Warning - DIMM In Socket x does not
have Primary Width of 4 and only supports standard ECC
Advanced ECC does not function when mixing DIMMs with Primary Widths of x4 and x8.
Audible Beeps: 1 long, 1 short, or none
Possible Cause: Installed DIMMs have a primary width of x8.
Action: Install DIMMs that have a primary width of x4 if Advanced ECC
memory support is required.
207-Invalid Memory Configuration - DIMMs Must be Installed
Sequentially
Audible Beeps: 1 long, 1 short
Possible Cause: Installed DIMMs are not sequentially ordered.
Action: Reinstall DIMMs in proper order.
207-Invalid Memory Configuration - DIMM Size Parameters Not
Supported.
Audible Beeps: 1 long, 1 short
Possible Cause: Installed memory module is an unsupported size.
Action: Install a memory module of a supported size.