101-I/O Rom Error; 102-System Board Failure; 102-System Board Failure, Cmos Test Failed - HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual

Hide thumbs Also See for ProLiant ML370 Generation 4:
Table of Contents

Advertisement

180-Log Reinitialized

101-I/O ROM Error

Audible Beeps: None
Possible Cause: Options ROM on a PCI, PCI-X, or PCI Express device is
corrupt.
Action: If the device is removable, remove the device and verify that the
message disappears. Update Option ROM for a failed device.

102-System Board Failure

Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
Action: Replace the system board. Run the server setup utility.

102-System Board Failure, CMOS Test Failed.

Audible Beeps: None
Possible Cause: 8237 DMA controllers, 8254 timers, and similar devices.
Action: Contact an authorized service provider for system board replacement.
.................................................................................................................239
CAUTION: Only authorized technicians trained by HP should
attempt to remove the system board. If you believe the system board
requires replacement, contact HP Technical Support before proceeding.
CAUTION: Only authorized technicians trained by HP should
attempt to remove the system board. If you believe the system board
requires replacement, contact HP Technical Support before proceeding.
Troubleshooting
237

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant ml370 g4

Table of Contents