HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual page 48

48 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
9. Secure the cable management arm to the slide rail.
10. Connect peripheral devices to the server. Refer to "Rear Panel Components
(on page 12)."
11. Connect the power cord to the back of the server.
12. Open the power cord retaining clip, and thread the power cord through the
retaining clip.
WARNING: To reduce the risk of electric shock, fire, or
damage to the equipment, do not plug telephone or
telecommunications connectors into RJ-45 connectors.
IMPORTANT: If the RILOE II board is installed in the server, be sure
that you attach the video cable to the video connector on the rear of the
RILOE II board. The standard video connector on the server rear panel
is not used when the RILOE II board is installed. For more information,
refer to the HP Remote Insight Lights-Out Edition II User Guide.
IMPORTANT: When using cable management arm components, be
sure to leave enough slack in each of the cables to prevent damage to
the cables when the server is extended from the rack.