Item
Description
1
x4 PCI Express expansion slots
2
100-MHz PCI-X expansion slots
3
Unit ID LED
4
Ethernet 10/100/1000 port
5
iLO management port
6
Parallel connector
7
Video connector
8
T-15 Torx screwdriver
2. Connect the power cord to the back of the server.
3. Open the power cord retaining clip, and thread the power cord through the
retaining clip.
IMPORTANT: If the RILOE II board is installed in the server, be sure
that you attach the video cable to the video connector on the rear of the
RILOE II board. The standard video connector on the server rear panel
is not used when the RILOE II board is installed. For more information,
refer to the HP Remote Insight Lights-Out Edition II User Guide.
Item
Description
9
Auxillary VHDCI SCSI blank
10
Mouse connector
11
Keyboard connector
12
Serial connector B
13
Serial connector A
14
USB connectors
15
Primary hot-plug power supply
16
Redundant hot-plug power supply
Server setup
41