HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual page 185

Troubleshooting 185
Invalid or incorrect command-line parameters
If incorrect parameters are passed into command-line options, an error message
describing the invalid or incorrect parameter is displayed and the program exits
(Example: Invalid source path for system configuration or ROMPaq files).
Correct the invalid parameter, and then restart the process.
Access denied on target computer
If you specify a networked target computer for which you do not have
administrative privileges, an error message is displayed describing the problem,
and then the program exits. Obtain administrative privileges for the target
computer, and then restart the process. Be sure the remote registry service is
running on a Windows®-based system.
Network connection fails on remote communication
Because network connectivity cannot be guaranteed, it is possible for the
administrative client to become disconnected from the target server during the
ROM flash preparation. If any remote connectivity procedure fails during the
ROM flash online preparation, the ROM flash does not occur for the target
system. An error message describing the broken connection displays and the
program exits. Attempt to ascertain and correct the cause of connection failure,
and then restart the process.
Failure occurs during ROM flash
After the online flash preparation has been successfully completed, the system
ROM is flashed offline. The flash cannot be interrupted during this process or the
ROM image is corrupted and the server does not start. The most likely reason for
failure is a loss of power to the system during the flash process. Initiate ROMPaq
disaster recovery procedures.
Target system is not supported
If the target system is not listed in the supported servers list, an error message is
displayed and the program exits. Only supported systems can be upgraded using
the Remote ROM Flash utility. To see if the server is supported, refer to the
Software and Drivers Download website
(http://h18007.www1.hp.com/support/files/server).