HP ProLiant ML370 Generation 4 Reference And Troubleshooting Manual page 248

248 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
404-Parallel Port Address Conflict
40X-Parallel Port X Address Assignment Conflict
Audible Beeps: 2 short
Possible Cause: Both external and internal ports are assigned to parallel port X.
Action: Run the server setup utility and correct the configuration.
404-Parallel Port Address Conflict Detected...
...A hardware conflict in your system is keeping some system components from working
correctly. If you have recently added new hardware remove it to see if it is the cause of the
conflict. Alternatively, use Computer Setup or your operating system to insure that no
conflicts exist.
Audible Beeps: 2 short
Possible Cause: A hardware conflict in the system is preventing the parallel port
from working correctly.
Action:
1. If you have recently added new hardware, remove it to see if the hardware is
the cause of the conflict.
2. Run the server setup utility to reassign resources for the parallel port and
manually resolve the resource conflict.
3. Run Insight Diagnostics ("HP Insight Diagnostics" on page 126) and replace
failed components as indicated.
600 Series
List of messages:
601-Diskette Controller
602-Diskette Boot Record
605-Diskette Drive Type
611-Primary Floppy Port Address Assignment
612-Secondary Floppy Port Address Assignment
Detected..............................................................................248
Error.....................................................................................................249
Error.................................................................................................249
Error...................................................................................................249
Conflict............................................................250
Conflict........................................................250