Table of Contents
Advertisement
22
en | Mounting Installation
6
Mounting Installation
This installation should be made by qualified service personnel
and conform to the National Electrical Code and applicable
local codes. This chapter details how to install the AutoDome
Easy IP for a surface (ceiling/wall) mount (supplied separately).
NOTICE!
i
Grounded conduit is required in order to meet the EMC
Regulation Requirements.
6.1
Installing the Wall Mount
1.
Determine a secure location for the wall mount (supplied
separately).
2.
Fit a user-provided metal single-gang junction box to the
wall.
3.
Attach a grounded metal conduit to the junction box
clamp.
Figure 6.1 Metal conduit
4.
Feed the wires through the conduit.
5.
Feed all wires from the metal junction box through the
arm.
6.
Attach the mounting cap to the arm.
7.
Fit the arm to a metal single-gang junction box.
F01U079609 | 1.0 | 2008.08
Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.
Advertisement
Table of Contents
