Table of Contents
Advertisement
104 en | Settings Menus
Decoupling the Drive Used
Each drive can only be associated with one user. If a drive is
already being used by another person, you can decouple the
drive and connect the drive to the AutoDome Easy IP. To
decouple the drive, do the following:
1.
Open the AutoDome Easy IP Livepage, then click the
Settings link followed by the Recording drop-down menu,
then click iSCSI. The iSCSI screen is displayed.
2.
Double-click a drive that is already being used in the iSCSI
LUN Map, a warning message is displayed.
Figure 12.18 Warning message
3.
Confirm the decoupling of the current user. The drive is
released and can be connected to the AutoDome Easy IP.
Figure 12.19 iSCSI dialog box
Storage Information
The status of the currently selected storage medium and the
data throughput are displayed here for information. You cannot
change any of these settings.
F01U079609 | 1.0 | 2008.08
Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.
Advertisement
Table of Contents
