Table of Contents
Advertisement
AVIOTEC 8000i IR
4
Installation
Notice!
i
Qualified personnel only.
Assembly and installation must only be performed by qualified personnel.
Notice!
i
Avoid backlight.
Backlight can disturb the video-based fire detection algorithm.
Notice!
i
Avoid image regions with continuous upward motion.
Continuous upward motion might lead to false alarms.
Notice!
i
Do not expose the image sensors to direct sunlight.
Do not obstruct the free flow of air around the camera.
Notice!
Minimum Illumination required.
i
To enable the proper functioning of the video-based fire detection algorithm, a minimal
illumination of 1 lx is required. If the illumination is less than 1 lx, the internal or additional
IR illumination is required.
Notice!
i
Avoid obstructions in the field of view!
Covered fires cannot be detected correctly. An unobstructed view of the detection area is
necessary.
Notice!
i
Make sure the camera is firmly mounted.
Camera shake might lead to non-detection. Avoid vibrations of the camera and the camera
environment.
4.1
Requirements
When installing the camera, take the following points into account or have prepared the
following:
–
–
–
–
–
–
–
–
–
Bosch Sicherheitssysteme GmbH
Computer and its IP address
Download of newest Firmware / Software tools
IP range of the network
Plan sketches with camera position and designation
Planning of the camera setting (size flame/ smoke, verification time + sensitivity if
available)
Recording
Required work equipment for configuration:
POE power supply + camera connection
Computer with admin rights and Internet access
User manual
Installation | en
25
2023.10 | 02 | F.01U.414.168
Advertisement
Table of Contents
