Table of Contents
Advertisement
3. MOUNTING SPECIFICATION
Caution: Install with appropriate screws to suit
mounting surface. Select a suitable location
protected from accidental damage, and tampering.
Mounting location must not expose the REG-X
camera to environmental conditions exceeding the
camera's specification. See page 20.
Caution: Ensure the selected location is protected
from falling objects, contact with moving objects, and
accidental interference from personnel. Please follow
all applicable building regulatory codes.
The following installation guidelines must be
followed:
•
Locate the camera such that it cannot be easily
interfered with, either intentionally or accidentally.
•
Select a mounting surface capable of supporting
the combined weight of the camera and mounting
hardware under all expected conditions of
vibration and temperature.
•
Secure all cabling.
•
When setting up the camera, it would be helpful
to have a vehicle parked at the position you want
to capture the license plate.
12
Advertisement
Table of Contents
