Table of Contents
Advertisement
78
en | Navigating the Menus
10.9
Inactivity Function
The Inactivity Function menu can be set so that the camera
automatically goes to preset, tour, or auto pan after the on-
screen keyboard controller has been in idle for a specified
amount of time. For example, if the on-screen joystick
controller has not been used for 10 seconds, the camera goes
to preset 1.
DOME SETUP MENU
LANGUAGE: ENGLISH
OSD DISPLAY: OFF
AUTO PIVOT: ON
INACTIVITY FUNCTION
INITIALIZE DOME
DOME INFORMATION
SAVE AND EXIT
EXIT W/O SAVE
Menu
Description
Mode
Disables/enables
the inactivity
function.
Function type
Reverts to the
defined mode of
operation.
F01U079609 | 1.0 | 2008.08
INACTIVITY FUNCTION MENU
MODE: OFF
FUNCTION TYPE:
FUNCTION NUMBER:
DWELL TIME:
SAVE AND EXIT
EXIT W/O SAVE
Options
ON, OFF
Tour - Accesses a
sequence of preset shots
combined to provide a
preprogrammed tour of
the area covered by an
AutoDome Easy IP
camera.
Auto pan - Customizes
auto pan tours.
Preset - Preselects and
stores a combination of
pan, tilt, and zoom
positions that allow a set
view to be recalled. Also
known as preset shot.
Installation Manual
AutoDome Easy IP
Default
OFF
Preset
Bosch Security Systems, Inc.
Advertisement
Table of Contents
