Table of Contents
Advertisement
50
en | Viewing Live Images and Controlling the
9.4
Entering a Keyboard Control Command
Use the Aux Control tab to enter keyboard control commands.
These commands are composed of a command number plus the
appropriate function key (Show Shot, Set Shot, Aux On, or Aux
Off). A valid combination either issues a command to the
camera or displays an on-screen menu.
Aux Control tab
The Aux Control tab allows you to enter preprogrammed
keyboard control commands. See Chapter 13: Keyboard
Commands by Number on page 133 for a list of all commands.
To access the Aux Control tab, navigate to the Livepage and
click the Aux Control tab. The following figure illustrates this
tab:
Figure 9.5 Aux Control tab
Number
Description
1
Command number field
2
Keypad (numbers 0-9)
3
Show a preset shot
4
Set a preset shot
5
Initiate a command
6
Delete a number in the command number field
7
OK button (not used)
8
Stop a command
F01U079609 | 1.0 | 2008.08
Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.
Advertisement
Table of Contents
