30
en | Mounting Installation
Figure 6.11 Attaching the safety wire to the mounting plate
13. Attach the camera to the mounting plate by turning the
dome camera approximately 15 degrees to the right and
locking into place, as shown in the illustration below.
Figure 6.12 Attaching the AutoDome Easy IP to the mounting plate
14. Secure the safety locking screw with the locking torx
wrench (T-10) supplied with the AutoDome Easy IP.
F01U079609 | 1.0 | 2008.08
Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.