Bosch VEZ IP Series Installation Manual page 127

Autodome easy ip
Table of Contents

Advertisement

AutoDome Easy IP
2.
Click the Alarm Settings link, then click Alarm Connections.
The AutoDome Easy IP displays the Alarm Connections
screen.
3.
Click the Connect on Alarm drop-down list and select On
to establish a connection to a pre-defined IP address in the
event of an alarm. Off, indicates no alarm connections are
made and Follows Input x, triggers an alarm.
4.
Click the Number of destination IP address drop-down list
and select a number from one to ten to specify the number
of the IP addresses. To configure multiple IP addresses,
select a number for the destination IP address, configure
the settings described below and then click the Set
button. You must click the Set button prior to configuring
the settings for another IP address.
5.
Click inside the Destination IP address input box and type
an IP address.
6.
Click inside the Destination password input box and type
the appropriate password for the IP address, if required.
7.
Click the Video transmission drop-down list and make a
selection (UDP or TCP (HTTP Port)).
8.
Click the Remote port drop-down list and make a
selection. Depending on the network configuration, select
a browser port here. The ports for HTTPS connections will
be available only if the On option is selected for the SSL
encryption parameter.
9.
Click the Video output drop-down list and make a selection
from First Available or one to four.
10. Click the Decoder drop-down list and make a selection
from First Available or one to four.
11. Click the SSL encryption drop-down list and make a
selection. The data for the connection, for example the
password, can be securely transmitted with SSL
encryption. If you have selected the On option, only
encrypted ports are offered in the Remote port parameter.
12. Click the Audio-connect drop-down list and select On if an
active connection should be reestablished automatically to
one of the specified IP addresses after each restart.
Bosch Security Systems, Inc.
Installation Manual
Settings Menus | en 121
F01U079609 | 1.0 | 2008.08

Advertisement

Table of Contents
loading

Table of Contents