Bosch VEZ IP Series Installation Manual page 119

AutoDome Easy IP
3. Click the Edit partition button. The AutoDome Easy IP
displays the Partition properties screen.
Figure 12.31 Partition Properties
4. Click the << and >> buttons to edit a partition. Make any
desired changes, then click the Format button to save the
modifications.
5. Click the Type of recording drop-down list and select the
number of alarm tracks to be used in the partition. One
alarm event can be recorded in each alarm track, and the
number of alarms entered can be recorded and archived. A
partition can contain a maximum of 128 alarm recordings.
6. Click the Set button when finished.
CAUTION!
!
Alarm tracks must be set up in the required partition for alarm
recording.
Bosch Security Systems, Inc. Installation Manual
Settings Menus | en 113
F01U079609 | 1.0 | 2008.08