Bosch VEZ IP Series Installation Manual page 34

28 en | Mounting Installation
NOTICE!
i
The fasteners and mounting surface must be capable of
supporting a maximum load of 11.33 kg (25 pounds).
Figure 6.9 Attaching the pendant pipe mount to the ceiling
CAUTION!
!
Select a rigid mounting location to prevent excessive vibration
to the AutoDome Easy IP Camera.
10. Attach the mounting plate (supplied with dome) to the
dome mounting cap with the three (3) screws supplied.
Ensure that the mounting plate's front end, as labeled on
the plate, is screwed to the first front thread, as shown in
Section Figure 6.10
dome cap, page 29.
F01U079609 | 1.0 | 2008.08
Attaching the mounting plate to the
Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.