Table of Contents
Advertisement
AutoDome Easy IP
12.5
iSCSI Menu
If you select the iSCSI server as the storage medium, you will
need to set up a connection to the desired iSCSI storage device
(Bosch product supplied separately) and set the configuration
parameters. For long-term, authoritative images, it is essential
that you use appropriately sized iSCSI storage.
The storage device selected must adhere to the iSCSI
specification, be available on the network, and be completely
setup. It must also have an IP address and be divided into
logical drives (LUN).
Option
iSCSI IP Address
iSCSI LUN Map
Bosch Security Systems, Inc.
Description
Used to enter the IP address of the required iSCSI
then, click the Scan button when finished. The
connection to the IP address is established. The iSCSI
LUN map field contains the corresponding logical
drives.
The LUN map displays the logical drives configured
for the iSCSI storage device. The current user is
displayed for each drive.
Double-click a free drive (LUN). The associated
information is called up and automatically displayed
in the fields below the map.
If the logical drive is password protected, you must
first enter the password in the Target password field
and click the Set button.
In cases where the information cannot be read due to
the network topology, you must enter the data
manually, so that the AutoDome Easy IP can access
the drive. In this case you should ensure that the
entries correspond exactly with the configuration of
the iSCSI device.
After entering all the settings in the relevant fields,
click Set. The AutoDome Easy IP attempts to create a
connection to the required drive using this data.
As soon as a connection is established, the selected
drive is used for recordings.
Installation Manual
Settings Menus | en 101
F01U079609 | 1.0 | 2008.08
Advertisement
Table of Contents
