Table of Contents
Advertisement
122 en | Settings Menus
12.9.3
Sending an Alarm E-mail
The device can be configured to send an e-mail when an alarm
has been triggered. You can send a JPEG image taken from the
camera or you can send a pre-defined Short Message Service
(SMS) text message. If you activate this feature, the device
sends the e-mail message to the specified e-mail server when
an alarm is triggered. To configure for Alarm e-mails, do the
following:
1.
Open the AutoDome Easy IP Livepage, then click the
Settings link.
2.
Click the Alarm drop-down list, then click Alarm E-Mail. The
AutoDome Easy IP displays the Alarm E-Mail screen.
Figure 12.37 Sending an Alarm E-mail
3.
Select On from the Send alarm e-mail drop-down list to
automatically send an e-mail in the event of an alarm.
4.
Type the IP address for the e-mail server that receives the
e-mail from the device and then transfers the e-mail to the
recipient within the Mail server IP address field.
5.
Type the SMTP user name and SMTP password necessary
to access the e-mail server.
F01U079609 | 1.0 | 2008.08
Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.
Advertisement
Table of Contents
