Bosch VEZ IP Series Installation Manual page 130

124 en | Settings Menus
6. Click the Network link to open the Network Settings page.
Figure 12.38 Network Settings Page
7. Configure the settings on this page based on the
addresses provided by your local network administrator.
NOTICE!
i
Click the Help on this page? link if you need more information.
8. Click the Set button to save the settings.
9. Launch another instance of Microsoft Internet Explorer.
10. Type the original IP address followed by /reset to restart
the AutoDome Easy IP.
For example, type http://192.168.0.1/reset in the
address bar and click Go.
11. Once you restart the AutoDome Easy IP, use the new IP
Address to access the LivePage.
12. Disconnect the AutoDome Easy IP Ethernet cable from the
dedicated network switch and reconnect the Ethernet
cable to the local area network (LAN).
F01U079609 | 1.0 | 2008.08 Installation Manual
AutoDome Easy IP
Bosch Security Systems, Inc.