Table of Contents
Advertisement
AutoDome Easy IP
Menu
Dome
information
Save and exit Saves the data and exits the menu.
Exit W/O save Exits the menu without saving the data.
10.8.1
Setting the Language
The AutoDome Easy IP offers three (3) complete languages to
choose from (English, Spanish, and French) and must be set in
two (2) separate locations. To set the language, proceed as
follows:
1.
Press the Aux Control tab then press 4 + 6 + Aux On via the
on-screen keypad to access the main menu.
2.
To navigate throughout the on-screen menu, press the
View Control tab to access the on-screen joystick.
3.
Press the down arrow on the on-screen joystick with your
mouse, select DOME SETUP, then press the right arrow to
display the menu options.
4.
Press the down arrow to select LANGUAGE, then press the
right arrow to display the menu options. When satisfied
with your selection, press the down arrow to select SAVE
AND EXIT.
To exit without saving, select EXIT W/O SAVE.
5.
Press the Settings link at the top of the web browser
screen, then click the General drop-down list on the left-
hand side of your screen and select Language (see
Section Figure 10.2
Language screen is displayed.
6.
Select the Website Language drop-down list to select the
appropriate language, then press Set.
Figure 10.2 Setting the language
Bosch Security Systems, Inc.
Navigating the Menus | en
Description
Options
Displays the firmware
version number.
Setting the language, page 77). The
Installation Manual
77
Default
F01U079609 | 1.0 | 2008.08
Advertisement
Table of Contents
