Bosch VEZ Series User Manual
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Security Camera
  5. VEZ Series
  6. User manual
Bosch VEZ Series User Manual

Bosch VEZ Series User Manual

Autodome easy ii
Hide thumbs Also See for VEZ Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Installation Manual
AutoDome Easy II
VEZ Series
en
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VEZ Series and is the answer not in the manual?

Questions and answers

Related Manuals for Bosch VEZ Series

Summary of Contents for Bosch VEZ Series

  • Page 1 AutoDome Easy II VEZ Series User Manual...

  • Page 3: Table Of Contents

    Installing the Camera to the Mounting Plate Installing a Recessed Mount Description 6.1.1 Additional Requirements 6.1.2 Preparing the Ceiling for Installation 6.1.3 Installing the Camera to the Mounting Plate Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 4 Connecting an Open Collector Output Getting Started 10.1 Powering On 10.2 Establishing AutoDome Easy II Control 10.2.1 Basic Keyboard Operation 10.2.2 Keyboard Commands 10.3 Setting the Camera Address 10.3.1 FastAddress F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 5 13.1.1 Command Lock (locked) 13.1.2 Bosch Menu (locked) 13.1.3 PTZ Setup (unlocked) 13.1.4 Other Menus Keyboard Commands by Number Preventive Maintenance Troubleshooting 16.1 AutoDome Easy II Operation and Control Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 6 Setting FastAddress with Alternative Protocols 17.1.1 Using a Pelco Controller 17.2 Pelco Protocol Mode 17.2.1 Hardware Configuration 17.2.2 Pelco Keyboard Commands 17.2.3 Pelco Keyboard Commands 17.2.4 Special Preset Commands Index F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 7: Safety

    Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 8 – If unsure of the type of power supply to use, contact your dealer or local power company. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 9 16. Attachments, changes, or modifications - Only use attachments/accessories specified by the manufacturer. Any change to or modification of the equipment not expressly approved by Bosch could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.

  • Page 10: Safety Precautions

    3 mm in each pole, into the electrical installation of the building. If it is needed to open the housing for servicing and/or other activities, use this all-pole F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 11 Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical...
  • Page 12 | Safety AutoDome Easy II Environmental statement - Bosch has a strong commitment to the environment. This unit has been designed to respect the environment as much as possible. Electrostatic-sensitive device - Take proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge.
  • Page 13 Network Voltage (TNV) circuits. Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
  • Page 14 The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 15 AVERTISSEMENT: Ce produit est un appareil de Classe A. Son utilisation dans une zone résidentielle risque de provoquer des interférences. Le cas échéant, l’utilisateur devra prendre les mesures nécessaires pour y remédier. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 16 CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Copyright This user guide is the intellectual property of Bosch Security Systems, Inc. and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.

  • Page 17: Customer Support And Service

    AutoDome Easy II Safety | en Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Repair Center Telephone: 800-566-2283 Fax: 800-366-1329 E-mail: repair@us.bosch.com...
  • Page 18 | Safety AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 19: Unpacking

    Verify that all the parts listed in Section 2.1 Parts List are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service.

  • Page 20: Safety Rules

    Do not use the device in the presence of flammable substances. – Do not allow children or unauthorized personnel to use the device. – Do not block any ventilation openings. – Keep this manual for future reference. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 21: Description

    This installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes. NOTICE! Grounded conduit is required in order to meet the EMC Regulation Requirements. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 22 | Description AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 23: Installing A Surface Mount

    Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – 4 in. x 4 in. Junction box – One (1) ground – T-10 Torx wrench Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 24: Preparing The Surface Mount For Installation

    Install a 4 in. gang box or square metal junction box (not supplied). Ensure junction box and mounting screws are capable of supporting a maximum load of 11.33 kg (25 pounds). Figure 4.2 Install User-supplied Junction Box F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 25: Installing The Camera To The Mounting Plate

    Attach user supplied ground to junction box. Connect the mating connectors with the flying leads to the user supplied wiring (see the AutoDome Easy II User Manual for wiring information). Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 26 Figure 4.4 Unlock Safety Locking Screw Plug the matching connectors from the camera into the mating connectors from the ceiling. Figure 4.5 Connect Cables Number Description Locking Screw Vertical Tab Mounting Plate F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 27 Note: Do not loosen brass mounting buttons. Figure 4.7 Attach Dome to Mounting P--late Number Description Vertical tab 10. Secure the safety locking screw with the user supplied locking torx wrench (T-10). Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 28 | Installing a Surface Mount AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 29: Installing A Wall Mount

    Additional Tools Required – Appropriate straight slot screwdrivers – No. 2 Phillips screwdriver – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – T-10 Torx wrench Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 30: Preparing The Wall Mount For Installation

    Attach a grounded metal conduit to the junction box clamp. Figure 5.2 Metal Conduit Feed the wires through the conduit. Feed all wires from the metal junction box through the arm. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 31 NOTICE! The metal junction box and mounting surface must be capable of supporting a maximum load of 11.33 kg (25 pounds). Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 32: Installing The Camera To The Mounting Plate

    Attach user supplied ground to junction box. Connect the mating connectors with the flying leads to the user supplied wiring (see (see the AutoDome Easy II User Manual for wiring information). F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 33 Plug the matching connectors from the camera into the mating connectors from the ceiling. Figure 5.6 Connect Cables Align wires on side of mounting plate with crescent shaped cut-out. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 34 10. Secure the safety locking screw with the user supplied locking torx wrench (T-10). 11. Pull excess wire back into the mount tube. 12. Confirm that the housing is electrically grounded. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 35: Installing A Recessed Mount

    Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – 4 in. x 4 in. Optional junction box – T-10 Torx wrench – LTC 9349MK mounting kit (optional) Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 36: Preparing The Ceiling For Installation

    LTC 9349MK mounting kit is recommended (supplied separately). See the instruction book that came with the mounting bracket for installation instructions. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 37 Crescent Shape Ensure clamping plates are angled inward by pushing up and into the two slots. Bracket with plate should be in the lower position. Figure 6.3 Adjust Mounting Clamps Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 38 Only tighten the clamp until it contacts the ceiling and you start to feel some resistance. If using a power screwdriver, set the torque level to the lowest setting. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 39: Installing The Camera To The Mounting Plate

    (see the AutoDome Easy II User Manual for wiring information). Remove the single safety locking screw on the base of the unit using the user-supplied Allen wrench. Figure 6.6 Unlock Safety Locking Screw Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 40 10. Attach the camera to the mounting plate by inserting the vertical tab into the recessed slot on the top of the camera dome to the right of the safety locking screw. Figure 6.8 Attach Safety Locking Screw F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 41 NOTICE! The recessed mounting bracket is provided with a an additional safety tether point. To prevent injury, attach a safety wire from a secure anchor point above the ceiling to this tether point. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 42 14. Use supplied T-10 wrench to secure the trim ring’s two (2) safety locking screws to the mounting bracket. 15. Snap trim ring into place. Ensure snaps are secure by attempting to lightly turn unit. Note: Unit should not turn. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 43: Installing A Pipe Mount

    – No. 2 Phillips screwdriver – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) – Ground Lug (outdoor use only) – T-10 Torx wrench Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 44: Preparing The Ceiling For Installation

    Note: Select the pipe length of 200 mm (7.9 in.), 300 mm (11.8 in.), or combine the two (2) pipes with the integral coupler for 505 mm (20 in.). F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 45 11.33 kg (25 pounds). Figure 7.3 Attach Pendant Pipe Mount to Ceiling CAUTION! Select a rigid mounting location to prevent excessive vibration to the AutoDome Easy II Camera. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 46 (3) screws supplied (Figure 1.4). Figure 7.4 Attach Mounting Plate to Dome Cap Number Description Crescent Shape Ground Lug Dome Cap Mounting Plate F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 47: Installing The Camera To The Mounting Plate

    Figure 7.5 Unlock Safety Locking Screw Plug the matching connectors from the camera into the mating connectors from the ceiling. Align wires on side of mounting plate with crescent shaped cut-out. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 48 10. Secure the safety locking screw with the user supplied locking torx wrench (T-10). 11. Pull excess wire back into the mount tube. 12. Confirm that the housing is electrically grounded. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 49: Preparing The Wiring

    User supplied Power Supply NOTICE! This unit accepts 24 VAC or 12 V DC, 1 A power only. Do not connect 120 V or 230 V to this camera. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 50: Video And Bilinx Cables

    Bilinx control data can also be sent over the same cable. Bilinx is a Bosch 2-way communication protocol that allows remote control, configuration, and updates over a video coax cable. Bilinx is available on all AutoDome Easy II units.

  • Page 51: Connecting The Video

    8.5.1 Biphase Biphase (Shielded 2-wire, half-duplex, multi-drop, 5000 ft. cable limit) is the standard Bosch protocol used to send Pan/ Tilt/Zoom control over 2-wire shielded twisted pair (STP) terminated with a 100 ohm terminal resistor. The AutoDome Easy II has a 100 ohm termination resistor between the Biphase C (+) and C (-) terminals.

  • Page 52: Direct Control

    C (-)(Biphase) White/Green C (-)(Biphase) C (+) (Biphase) Yellow C (+)(Biphase) Ground White/Orange 11 Shield RS485 (+) Blue Keyboard Cable RS485 (-) White/Blue Keyboard (i.e. LTC 5136) Reserved Violet Reserved Gray F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 53: Daisy Chaining

    Connect the biphase (-) from the first camera white/green lead to the second camera white/green lead and secure. Repeat steps as required for up to four (4) cameras. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 54: Rs485

    2-wire mode, although RS485 can be connected in a 2- or 4-wire mode. NOTICE! The wire shield must be tied to signal at both ends, if 2-wire twisted pair is used. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 55 Connection C (-) (Biphase) White/Green C (+) (Biphase) Yellow Ground White/Orange Head End RS485 RS485 (+) Blue Data (+) RS485 (-) White/Blue Data (-) Reserved Violet Ground Reserved Gray Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 56 | Preparing the Wiring AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 57: Alarms And Relay Connections

    Ref. # User Contact Dome Color Normally Alarm In 1 or Alarm In 2 Brown IN 1 or Open (Ref. #3) Orange IN 2 Common Ground (Ref. #4) Green Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 58: Connecting A Normally Closed Alarm

    Setup>Inputs Setup, and set Alarm Input # to N.C. See the table below for contact and condition details. AutoDome Easy II Programmed N.C. Circuit Alarm Indication Open Alarm Closed Normal F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 59: Alarm Outputs

    32 VDC @ 150 ma. Connect the appropriate stripped wire to the open collector of the transistor’s white wire. Connect the appropriate stripped wire to the ground (GND) connector. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 60 | Alarms and Relay Connections AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 61: Getting Started

    Using the AutoDome Easy II Configuration Tool software running on a PC with Bilinx communication protocol. Refer to the CTFID User Guide for instructions. – Using a Digital Video Recorder (DVR) such as the Bosch Divar XF version 2.00 or higher. Bosch Security Systems, Inc. User Manual...

  • Page 62: Basic Keyboard Operation

    Move the joystick forward and back. To Zoom In Twist the joystick clockwise. To Zoom Out Twist the joystick counterclockwise. Table 10.2 Typical Keyboard Controls for an AutoDome Easy II Camera F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 63: Keyboard Commands

    You may also want to customize some of the AutoDome Easy II default settings. NOTICE! You do not need to set a camera address if using Bilinx. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 64: Fastaddress

    – ON-998-ENTER: Displays and programs all cameras with or without an address in the system. – ON-997-ENTER: Displays the current address status of all cameras in the system simultaneously. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 65 FastAddress is complete. NOTICE! FastAddress is stored in nonvolatile memory and does not change if the power is turned off or if the default settings are restored. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 66 | Getting Started AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 67: On-Screen Display Menu Navigation

    Time Saver Tip: Scrolling through menus can be time consuming; to quickly return to “exit” prompt, just twist the joystick or use the zoom in feature. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 68 Language Displays the language. Diagnostics Displays the status of diagnostic events. NOTICE! To select the Exit Menu item from anywhere in the current menu, use the Zoom command. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 69: Camera Setup Menu

    * Line Lock Delay: * Backlight Comp: * Shutter Mode: Auto SensUP * Shutter: 1/60 * Auto SensUP Max: * Pre-Comp Restore Defaults... * = Factory Setting Focus / Iris: Select Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 70 4=20db, 5=24db, 6=28db) gain control adjusts to when set to AUTO. Sharpness Adjusts the Sliding scale: – (0 to 16) + 12 sharpness level of the picture. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 71 SensUP on or SensUP off. Shutter Adjusts the Sliding scale: 1/60 sec. electronic – (1/60 (1/50) at extreme (NTSC) or shutter speed left to 1/10000) + 1/50 sec. (AES). (PAL) Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 72: Lens Setup

    CONSTANT * Auto Iris Level: * Focus Speed: * Iris Speed: * Max Zoom Speed: FAST * Digital Zoom: Restore Defaults * = Factory Setting Focus / Iris: Select F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 73 Iris Speed Adjusts the Sliding scale: – (1 to 10) + manual iris speed. Max. Zoom Adjusts the SLOW, MEDIUM, or FAST FAST Speed manual zoom speed. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 74 | On-Screen Display Menu Navigation AutoDome Easy II Menu Description Sub-menu / Description Default Setting Digital Enables digital OFF or ON Zoom zoom. Restore Restores all Defaults default settings for this menu. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 75: Ptz Setup Menu

    – (3 sec. to 10 min.) + presets during the tour. PTZ Fixed Sets pan and Sliding scale: – (1 to 15) + Speed tilt speed when controlled by a fixed speed controller. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 76 AutoDome Easy Automatically INVERTED or NORMAL NORMAL II Orientation rotates the video 180º. Freeze Frame Holds a OFF or ON On Preposition preposition video frame while moving to another preposition. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 77: Display Setup Menu

    Menu items with an * are the default settings. Display Setup Exit... * Title OSD: MOMENTARY * Camera OSD: Display Adjust: Sector Blanking... Privacy Masking... Restore Defaults * = Factory Setting Focus / Iris: Select Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 78 Up: Moves screen title up. and vertical Down: Moves screen title position of the down. on-screen title. Brighter: Brightens the intensity of the on-screen text. Darker: Darkens the intensity of the on-screen text. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 79 (8) to a scene. Restore Restores the Defaults default setting for this menu only. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 80: Communication Setup Menu

    2400 to 57600. (Note: If stepping from 2400 to 57600 baud, you must first set the controller to 19200 for AutoBaud to detect the higher baud rate.) F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 81 57600. Then follow the OSD to confirm the selection. Bilinx Turns on Bilinx control Toggles ON or OFF. communication. (Only available when not connected to a Bilinx data interface unit.) Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 82: Alarm I/O Setup

    6. Aux Off 7. NONE 8. NONE 9. NONE 10. NONE 11. NONE 12. NONE Focus / Iris: Select Type Focus / Iris: Select Right / Left: Select Mode F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 83 5. Aux On 6. Transmit 2-12 Command 7. OSD Outputs 8. NONE 9. NONE 10. NONE 11. NONE 12. NONE Focus / Iris: Select Type Right / Left: Select Mode Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 84 Defines a physical N.O.: Normally N.O. output. open circuit N.C.: Normally closed circuit Outputs 2-12 Refer to Section 14 Keyboard Commands by Number, page 97 for available Aux commands. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 85: Alarm I/O Rule Setup Menu

    9. Rule 9 Empty 10. Rule 10 Empty Aux On 78 Latched 11. Rule 11 Empty NONE 12. Rule 12 Empty Focus / Iris: Select Focus / Iris: Select Type Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 86 Setting Exit Saves and exits the menu. Enabled Turns the rule on or off YES to enable or NO to after its inputs and disable outputs have been defined. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 87 NOTICE! You can include up to four (4) Input and Output events in a single rule. Each input and output, however, must be true for the alarm's rule to be valid and enabled. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 88: Language Menu

    Focus / Iris: Save and Exit Language Menu Choices: Menu Description Default Setting Exit Saves and exits the menu. Choose a language Select a language in English which the system displays the on-screen menus. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 89: Diagnostics Menu

    Saves and exits the menu. Alarm Status Enters the Alarm Alarm Inputs 1 to 3, Alarm Status menu and Output 1 displays the real time status of alarm inputs and outputs. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 90 Displays the number of power-up events. Video Loss Events Displays the number of time that video was lost. Total Time On Displays the total of time that the video was on. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 91: Common User Commands (Unlocked)

    AutoDome Easy II Common User Commands (unlocked) | en Common User Commands (unlocked) This chapter details the commonly used Bosch keyboard setup commands. See Section 14 Keyboard Commands by Number, page 97, for a complete list of commands. 12.1 Setting AutoPan Mode AutoPan mode pans the AutoDome Easy II camera 360º...

  • Page 92: Configuring Preposition Tours

    Use the Focus/Iris buttons to add or remove the selected scene from the tour. To change the dwell period of a tour: Press ON-15-ENTER to access the Tour Period Menu. Follow the on-screen instructions. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 93: Programming The Inactivity Operation

    Press ON-101-ENTER to start recording the tour. Press OFF-101-ENTER to stop the tour. To playback Recorded Tour B: Press ON-52-ENTER to begin continuous playback. Press OFF-52-ENTER or move the joystick to stop playback. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 94 | Common User Commands (unlocked) AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 95: Pelco On-Screen Menus

    Camera Setup PTZ Setup Edit Password *FastAddress: Not Set Advanced Software Version Ack and Reset Alarms Restore All Settings Reset All Memory * = Factory Setting Focus / Iris: Select Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 96 AutoDome Easy II memory. (locked) NOTICE! After a period of 4.5 minutes of inactivity, the OSD menu times-out and exits without warning. Some unsaved settings can be lost! F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 97: Command Lock (Locked)

    Focus or Iris on a locked command, the AutoDome Easy II displays the on-screen message: "Command is Locked." 13.1.2 Bosch Menu (locked) The Bosch Menu allows full access to the AutoDome Easy II main Setup Menu and all AutoDome Easy II configuration settings. Pelco menu...
  • Page 98 Night Switches from color ON: Sets Night Mode on. Mode to monochrome. OFF: Sets Night Mode off. (Day/Night AUTO: Sets Night Mode to models Auto set. only) F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 99: Ptz Setup (Unlocked)

    Changes the Autopan Sliding scale: 30°/sec. and AutoScan –(1°/sec to 60°/sec) + speeds. Edit Presets Modifies preset 1-99 scenes scenes. Limit Stops Toggles the Limit ON or OFF Stops for AutoScan. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 100 “A” or “B” “A” Pattern 1 or 2, if normal pattern command does not respond. AutoPivot Follows a subject ON or OFF while beneath the camera, without inverting the picture. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 101: Other Menus

    (locked) factory default settings. Reset All Memory Restores all settings to their original (locked) factory default settings and clears all user programmed settings such as preset scenes and recordings. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 102 | Pelco On-Screen Menus AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 103: Keyboard Commands By Number

    Set Pre- Enters dwell position Tour adjustment slide bar Period (dwell) On/Off AutoPivot Enables/disables Enable AutoPivot On/Off Backlight Backlight Comp Compensation On/Off Electronic Enters Shutter Shutter Speed slide bar Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 104 On/Off Playback A, Activate/Deactivate Single On/Off Playback B, Activate/Deactivate Continuous On/Off Playback B, Activate/Deactivate Single On/Off Command On–lock on Lock/Unlock Off–lock off On/Off On Screen On–enable Display Off–disable F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 105 Enters Privacy Masking Masking menu On/Off Command On–lock on Lock/Unlock Off–lock off On/Off Lens Polarity On–reverse menu Off–normal On/Off Lens Polarity On–reverse menu Off–normal On/Off Lens Polarity On–reverse menu Off–normal Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 106 Factory P/T Set–recalibrate home home position position Reset ALL Restores all settings to original defaults and clears all user- programmed settings Shot Edit Tour Enters the Tour add/ remove menu F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 107 901- Adds/ Set ###–adds preset Shot Removes a Shot ###–removes preposition preset shot from Tour 1 *Commands perform the same function Aux 55 is required for older Allegiant systems. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 108 102 en | Keyboard Commands by Number AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 109: Preventive Maintenance

    Inspect all connecting cables for deterioration or other damage. Wipe housing with a clean damp cloth. Clean P.C (LEXAN) dome/windows with an approved P.C (LEXAN) Cleaner (Novus LEXAN cleaner-plastic polish).Verify that all the mounting hardware is secure. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 110 104 en | Preventive Maintenance AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 111: Troubleshooting

    Set the synchronization mode to INT.NTSC Model power frequency in LL mode: 60 Hz. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 112: Autodome Easy Ii Operation And Control

    Check that the Yellow LED, located on the top of the AutoDome Easy II unit, turns on when receiving pan/tilt commands from the controller keyboard. The Yellow LED indicates data is being received. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 113 – Check that the maximum wire distance has not been exceeded for the control protocol. If O.K., then: – Check that all wiring meets Bosch recommended standards and specifications. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 114 Check that the camera lens cover is removed. If O.K., then: – Check that the maximum coax distance has not been exceeded. If O.K., then: – Restore all camera settings (ON-40-ENTER). F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 115 Check that the maximum coax distance has not been exceeded. If O.K., then: – Check the integrity of all BNC connectors and splices. If O.K., then: – Contact Bosch Technical Support. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 116 110 en | Troubleshooting AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 117: Alternative Control Protocols

    Pelco-P addresses above 32 are repeated in multiples of 32 (1, 33, 65, 97 are the same). Pelco-D addresses above 254 are repeated in multiples of 254 (1, 255, 509, 763 are the same). Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...

  • Page 118: Pelco Protocol Mode

    AutoDome Easy II responds to Pelco-D or Pelco-P protocol commands. NOTICE! The AutoDome Easy II supports only the RS-485 protocol while in Pelco mode. It does not transmit responses back to the controller. F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 119: Hardware Configuration

    NOTICE! To save a preset, enter the desired number and hold the PRESET key for approximately two (2) seconds. To recall a preset, enter the desired preset number (or command) and momentarily press and release the PRESET key. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 120 Activates / deactivates alarm relay. Aux Off 91 – Aux On Press Activate Zone Scan (display zone titles). 92 – Aux On Press Deactivate Zone Scan (re-move zone titles) F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.

  • Page 121: Special Preset Commands

    99-PRESET Starts an AutoScan NOTICE! Some Pelco controllers do not support all the preset command numbers. Consult the specific Pelco controller's documentation for supported preset commands. Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 122 116 en | Alternative Control Protocols AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 123 77 maximum gain level 64 normally open dry contact pre-compensation 66 sharpness 64 normally open supervised shutter 65 contact 77 synchronization alarm status 83 mode auto focus 67 Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 124 86 ON-998-ENTER 58 Tour Period menu 86 ON-999-ENTER 58 ON-9-ENTER 87 daisy chain Pelco 113 termination 47 defining physical inputs 77 physical outputs 78 rules 80 F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 125 90 in-ceiling 29 presets 93 surface mount 29 standard tour 93 base 19 Enter key 57 wires extended ATW 64 power 43 internal temperature 84 iris speed 67 Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 126 67 ON-998-ENTER 58 masking ON-999-ENTER 58 privacy 73 ON-9-ENTER 87 maximum distances 44 on-screen display 61 maximum zoom speed 67 OSD 61 outdoor white balance 64 outputs (1-3) 78 F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 127 95 protocol software version 95 Bilinx 75 PTZ Setup 93 Pelco 112 AutoPivot 94 Pelco-D 112 edit standard tour 93 Pelco-P 112 limit stops 93 presets 93 Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 128 81 view 85 input Show 57 Shot 81 Show Shot 57 status 80 shutter 65 rule (1-12) 80 shutter mode 65 Rule Setup menu 79 software version 90 F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 129 Tour Period menu 86 transmitting video 45 user commands 85 video loss events 84 white balance 64 wires alarm 43 control 43 power 43 video 43 zero pan 115 Bosch Security Systems, Inc. User Manual F.01U.139.424 | 2.0 | 2009.08...
  • Page 130 124 en | Index AutoDome Easy II F.01U.139.424 | 2.0 | 2009.08 User Manual Bosch Security Systems, Inc.
  • Page 132 Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. Telephone +1 888-289-0096 +1 585-223-9180 www.boschsecurity.com © Bosch Security Systems, Inc., 2009; Data subject to change.

Table of Contents