Chapter 6. Serial-Based Remote Product Management; Introduction - Comtech EF Data CDM-800 Installation And Operation Manual

Chapter 6. SERIAL-BASED REMOTE PRODUCT
6.1

Introduction

Serial‐based Remote Product Management of the CDM‐800 Gateway Router is available using the rear panel 'CONSOLE' port.
1. To proceed with Serial‐based Remote Product Management, assumptions are made that:
•
The CDM‐800 Gateway Router is operating with the latest version firmware files.
•
The CDM‐800 is connected to a user‐supplied Windows‐based PC as follows:
o The PC serial port is connected to the CDM‐800 rear panel 'CONSOLE' port using a user‐supplied serial cable.
o The PC Ethernet port is connected to the CDM‐800 rear panel 'MANAGEMENT | FE' 10/100 BaseT Ethernet port
o The PC is running a terminal emulation program (for operation of the CDM‐800 Serial Command Line Interface)
•
The CDM‐800 Management IP Address has been noted using the CDM‐800 Serial Command Line Interface (CLI).
with a user‐supplied hub, switch, or direct Ethernet cable connection.
and a compatible Web browser (for operation of the CDM‐800 Web Server Interface).
MANAGEMENT
6–1