Table of Contents
Advertisement
CDM-800 Gateway Router
Updating Firmware
D. Use Windows Command‐line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the Run... icon (or,
depending on Windows OS versions prior to Windows 95, click the MS‐DOS Prompt
icon from the Main Menu).
•
Next, open a Command‐line window...
o For Windows 95 or Windows 98 – Type "command".
o For any Windows OS versions later than Windows 98 – Type "cmd" or
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command‐line 'c:\>' prompt, type "mkdir temp" or "md temp"
There should now be a "temp" folder created and available for placement of the firmware file
download.
"command".
Prompt.
(mkdir and md stand for make directory), and then click [OK].
4–5
Revision 1
MN-CDM800
Advertisement
Table of Contents
