Table of Contents
Advertisement
CDM-800 Gateway Router
Ethernet-based Remote Product Management
5.4.4.2.2
Admin | SNMP
Sect. 5.3 SNMP Interface
Use this page to set up and return administration information for the CDM‐800 Simple Network
Management Protocol (SNMP) feature.
SNMP Configuration
THE SNMP TRAP DESTINATION IP ADDRESS FEATURE IS A FUTURE OFFERING. IT IS NON‐
FUNCTIONAL AT THIS TIME.
•
Enter an SNMP Read Community string. The SNMP Read Community string can be any
combination of characters and a length of 4 to 15 characters. The factory default SNMP
Read Community string is public.
Click [Submit] to save.
•
Enter an SNMP Write Community string. The SNMP Write Community string can be any
combination of characters and a length of 4 to 15 characters. The factory default SNMP
Write Community string is private.
Click [Submit] to save.
Figure 5‐4. Admin | SNMP page
5–11
Revision 1
MN-CDM800
Advertisement
Table of Contents
Need help?
Do you have a question about the CDM-800 and is the answer not in the manual?
Questions and answers