Table of Contents
Advertisement
3.4.4 Setting memory scan radio
system (MODE SEL)
By setting a mode in the "MODE SEL" menu, the DJ-X2000 will selectively scan
the memory channels of the specified mode.
1
Call up the MODE SEL screen.
3
2
1
2
Select the radio type you are scanning.
Using the dial or UP/DOWN key, point the arrow at the
radio type you are scanning. Press the
radio type can be selected from ALL, AM, NFM, WFM,
USB, LSB, and CW. If ALL is selected, all the channels
will be scanned regardless of the radio type (the initial setting is ALL).
The display will return to the MR screen. Point the arrow at END and then press
TF
the
key (Alternatively, press the
ENT
appearing on the display).
Press the
key, and then press
F
SET
the
key with
HELP
the display.
The menu will appear. Point the
arrow at +MR using the dial or UP/DOWN key, and then
TF
press the
key.
ENT
The MR screen will appear. Point the arrow at +MODE
SEL and then press the
TF
key. The
ENT
key, and then press the
F
MR
shown on
MODE S E L
END
TF
key.
ENT
MODE SEL
A L L
AM
TF
ENT
key with
73
Advertisement
Table of Contents
