Table of Contents
Advertisement
3
Specify a priority interval in a range between 1 and 12 seconds in 1-second
steps using the UP/DOWN key, and then press the
5s).
The display will return to the PRIO menu. Point the arrow at END and then press
the
TF
ENT
3.1.22 Setting search resume condition
For the DJ-X2000 to perform the Channel Scope function, its receiver is used for
searching the signals, and the sound will be intermit at the moment when the
search takes place.
This setting determines how often the search takes place in the Channel Scope
function. This is referred to as the "search mode".
1
48
Specify a priority interval.
TF
key (Alternatively, you may press the
ENT
key with
shown on the display).
Note:
If you exit the PRIO menu by pressing the
canceled.
(SRCH MODE)
Call up the CH SCOPE menu.
Press the
press the
shown on the display.
The CH SCOPE menu will
appear. Point the arrow at +CONFIG using the dial or
UP/DOWN key, and then press the
The CONFIG menu will appear. Point the arrow at +CH
3
SCOPE and then press the
2
1
TF
key (the initial setting is
ENT
key, and then press the
F
SKIP
key, the changed setting is
CLR
F
key, and then
SET
key with
HELP
TF
ENT
CH SCOPE
I N T ERV A L
CON T I NUE
TF
key.
ENT
key.
Advertisement
Table of Contents
