Table of Contents
Advertisement
3.4.14 Searching for a memory tag
This function is used to search for a stored memory channel using its name.
1
Call up the MR NAME SRC screen.
3
2
1
2
Enter the characters you want to search for.
Select each character by turning the dial, and then
establish it by pressing the DOWN key. The established
character can be canceled by pressing the UP key. Even
if you enter the first few characters, the appropriate
channel can be searched for. At least 1 character should be entered.
3
Start the search.
TF
Press the
key. The search will start.
ENT
After the search has been finished, the appropriate channel appears on the
display. If more than 1 channel are found, "→" appears on the right end of the
display indicating that more than 1 channel have been found.
4
Select a channel.
Using the dial or UP/DOWN key, select the channel you want to receive. Press
TF
the
key.
ENT
Note:
If many memory channels are stored, it will take longer time for the search.
Press the
key, and then press
F
M NAME
the
key with
RFC
on the display.
M
R
appearing
A BCDE FGH I J K
M
R
A BCDE FGH I J K
A BC
83
Advertisement
Table of Contents
