Using The Bank Link Function; Selecting Memory Channels For Scanning - Alinco DJ-X2000 Instruction Manual

3.4.5 Using the BANK LINK function

This function lets you scan specific memory banks.
1
2
Using a numeric key, specify the bank number you want
to link. Pressing the
A through E. To use all the memory banks for scanning,
select all the banks 0 through 9. After you have finished
specifying the bank(s), press the
The display will return to the MR screen. Point the arrow at END and then press
the
key with
3.4.6 Selecting memory channels for
Only the specified memory channels can be used for scanning. Up to 200
memory channels (20 programs x 10 banks) may be specified for scanning. To
perform scanning on the memory channels, press the
the
1
74
Call up the MR LINK screen.
Press the
the
the display.
The menu will appear. Point the
arrow at +MR using the dial or UP/DOWN key, and then
press the
The MR screen will appear. Point the arrow at +MR
3
LINK and then press the
Select the memory bank you want to use for scanning.
F TUNE
TF
key (Alternatively you may press the
ENT
appearing on the display).
scanning
A~B S
key with appearing on the display.
SCN
Call up the PMR screen.
Press the
the
the display.
The menu will appear. Point the
arrow at +MR using the dial or UP/DOWN key, and then
press the
The MR screen will appear. Point the arrow at +PMR
3
and then press the
2
1
key, and then press
F
SET
key with shown on
HELP
TF
key.
ENT
key toggles from bank groups
TF
key.
ENT
F
key, and then press
F
SET
key with shown on
HELP
TF
key.
ENT
TF
ENT
MR
MR L I NK
MODE S E L
TF
key.
ENT
M R Ba n k L i n k
A 1 - - - 5 - - - -
B - - - - - - - - - -
key, and then press the
key, and then press
F
MR
PMR
MR L I NK
key.
TF
ENT