Table of Contents
Advertisement
• As the DJ-X2000 goes away from the bug
• The number of I shown at the lower right corner of the
display tells you the distance to the location of the bug.
Each I represents approximately 1 m. For example, 5
I show that the bug is located more than 5 m away.
56
Note:
If no bug is found after the specified range has been scanned, the message
"NO FOUND" appears on the display.
CAUTION:
• The effective range of sound monitoring for bugs is normally
between approximately 1 m and 5 m.
• The transweeper is greatly affected by the intensity of radio from
the bug and the sensitivity of the microphone. It may malfunction
or fail depending on the ambient conditions (where there are too
many echoes).
• If the DJ-X2000 is suddenly moved during its transweeper process,
the Doppler effect causes a malfunction.
• The transweeper may not work normally depending on the relation
between the orientation of the speaker and the location of the bug.
• This function does not work normally when radio with modulation
signals of 2300 Hz is received.
(
)
A
1
1 5 4 .
(
)
A
1
1 5 4 .
Advertisement
Table of Contents
