Directly Changing The Settings - Alinco DJ-X2000 Instruction Manual

3.1.31 Directly changing the settings

This function allows you to enable/disable the direct changes of the settings for
radio type, frequency step, attenuator, and CTCSS decoding function in the MR
or PMS modes. When it is turned ON, the settings for radio type, frequency step,
attenuator, and CTCSS decoding function can be directly changed in the
currently displayed MR or PMS mode.
1
2
Point the arrow at ON or OFF using the dial or UP/DOWN key, and then press
the
The display will return to the CONFIG screen. Point the arrow at END and then
press the
TF
ENT
62
Call up the DIRECT WR screen.
Press the
the
the display.
The menu will appear. Point the
arrow at +CONFIG using the dial or UP/DOWN key, and
then press the
The CONFIG screen will appear. Point the arrow at
3
+DIRECT WR and then press the
2
1
6
5
4
Selecting ON/OFF for DIRECT WR.
TF
key (the initial setting is OFF).
ENT
TF
key (Alternatively, you may press the
ENT
key with shown on the display).
Note: If you exit the CONFIG screen by pressing the
settings are canceled.
key, and then press
F
SET
key with shown on
HELP
TF
key.
ENT
D I RECT WR
ON
OFF
TF
key.
ENT
key, and then press the
F
SKIP
key, the changed
CLR