Table of Contents
Advertisement
1.3.4 Key pad
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
12
MODE
Inputs 1. Press in combination with the
1
switch the radio band.
STEP
Inputs 2. Press in combination with the
2
frequency step.
ATT
Inputs 3. Press in combination with the
3
the attenuator ON/OFF.
MIC
Inputs 4. Press in combination with the
4
turn the Directional microphone function ON.
AUTO MW
Inputs 5. Press in combination with the
5
the auto memory write function ON/OFF.
KL
Inputs 6. Press in combination with the
6
lock/unlock keys.
SCRT
Inputs 7. Press in combination with the
7
the Descrambler.
PRIO
Inputs 8. Press in combination with the
8
the priority function ON/OFF.
CTCSS
Inputs 9. Press in combination with the
9
the CTCSS decoder.
SKIP
Clears settings. In VFO mode, press in combination
CLR
with the
modes, press in combination with the
the scan pass frequency and skip channel.
REC
Inputs 0. Press in combination with the
0
turn the recording function ON.
F TUNE
Inputs • (decimal point). Press in combination with the
SET
Press to call up the Help-navigator. Press in
HELP
combination with the
M NAME
Press to turn the RF checker ON. Press in
RFC
combination with the
search function ON.
A~B S
Starts scanning. Press in combination with the
SCN
key to scan between band A and band B.
TF
Enters input values. Press in combination with the
ENT
key to turn the Transweeper ON.
key to set VFO-link. In PMS and MR
F
key to set the Flash tune function.
key to call up menus.
key to turn the Memory
key to
key to set
key to turn
key to
key to turn
key to
key to set
key to turn
key to set
key to set
F
key to
Advertisement
Table of Contents
