Table of Contents
Advertisement
• CTCSS scanning
This function is used to scan for CTCSS signals.
1
Call up the CTCSS SET menu.
3
2
1
6
5
4
9
8
7
0
R
2
Start scanning
Point the arrow at CTCSS SCAN using the dial or UP/DOWN key, and then
TF
press the
key. This will start scanning.
ENT
Once CTCSS signals are detected, the scanning stops.
• CTCSS reversing
This function is used to reverse the CTCSS decoding function. When it is set to
ON, CTCSS signals of a mismatching frequency are received while those of a
matching frequency are not received.
1
Call up the CTCSS REVERSE screen.
3
2
1
6
5
4
9
8
7
0
R
2
Select ON/OFF for the CTCSS reversing function.
Point the arrow at ON or OFF using the dial or UP/DOWN key, and then press
TF
the
key.
ENT
Note:
This function may fail if signals are too weak or include too many noises.
Press the
F
key, and then press
CTCSS
the
key with
shown on
9
the display.
The CTCSS SET menu will
appear.
Press the
F
key, and then press
CTCSS
the
key with
shown on
9
the display.
The CTCSS SET menu will
appear. Point the arrow at REVERSE using the dial or
UP/DOWN key, and then press the
CTCSS SET
MANUA L
C T CS S SCAN
REVERSE
OF F
ON
TF
key.
ENT
53
Advertisement
Table of Contents
