Table of Contents
Advertisement
2.10 Turning backlight ON/OFF
The DJ-X2000 has a backlight to make it easier to use at night. The backlight can
be turned ON/OFF as follows.
2.10.1 Turning backlight ON/OFF
manually
• To turn the backlight ON
• To leave the backlight ON at all times
2.10.2 Turning backlight ON/OFF based
on the setting
The backlight can be automatically turned ON/OFF in accordance with the
setting. To do so, perform the following steps:
1
Display the LAMP screen.
1
4
LAMP
Press the
the dial or keys. Keys also light up when pressed or held
down. The backlight goes OFF automatically if the controls
are not used for approximately 5 seconds.
Press the
F
The backlight will remain ON until you press the
LAMP
key again.
Press the
SET
the
key with
HELP
The menu will appear. Using the
dial or the UP/DOWN key, point
the arrow at +CONFIG, and then press the
The CONFIG menu will appear. Point the arrow at
+LAMP, and then press the
3
2
6
5
9
key. The display will be lit while operating
key to display
, followed by the
key, and then press
F
displayed.
TF
ENT
LAMP
key.
LAMP
TF
key.
ENT
key.
25
Advertisement
Table of Contents
