Table of Contents
Advertisement
2
Point the arrow at +PRI MODE using the dial or
UP/DOWN key, and then press the
3
Select a priority option using the dial or UP/DOWN key, and then press
the
The display will return to the PRIO menu. Point the arrow at END using the dial
or UP/DOWN key, and then press the
F
3.1.20 Setting priority signal channel
This setting allots a memory channel for the priority scan. The priority scan must
be ON for this setting to be effective.
1
2
Point the arrow at +PRIO FREQ and then press the
TF
ENT
46
Call up the PRI MODE screen.
Select a priority option.
TF
key. The available options are listed below (the initial setting is STOP).
ENT
BUSY
When signal is received on the priority channel, the DJ-X2000
stays on the priority frequency until ithe signal vanishes.
STOP
When signal is received on the priority channel, the DJ-X2000
stays on the priority frequency even after the signal vanishes.
TIMER
Once signals are received on the priority channel, they will be
received for a given interval. For specifying this interval, see
"3.1.21 Specifying a priority interval" (page 48).
key, and then press the
Note:
If you exit the PRIO menu by pressing the
is canceled.
Call up the PRIO menu.
Press the
the
the display.
The PRIO menu will appear.
Point the arrow at +PRIO using the dial or UP/DOWN
key, and then press the
3
2
1
Call up the PRIO FREQ screen.
key.
TF
key.
ENT
TF
key (Alternatively, you may press the
ENT
TF
key with
shown on the display).
ENT
F
key, and then press
SET
key with
shown on
HELP
TF
ENT
PR I MODE
S T O P
T I MER
SKIP
menu, the changed setting
CLR
PR I O
PR I F REQ
PR I MODE
key.
PR I FREQ
N o w F REQ
MEMORY
Advertisement
Table of Contents
